Wheel & Tire Cleaner, Extreme
Powerful foaming formula. Safe on all factory and aftermarket coated wheels. Dissolves: brake dust; road grime. Dissolves grease, road grime & brake dust reveals brilliant shine. Your wheels and tires are constantly under assault by grease, road grime and brake dust that get baked on during the intense heat of driving conditions. Our formula is specifically formulated to attack grease, grime and brake dust - dissolving them to reveal your beautiful, shiny rims and deep, wet-black tires. Formula dissolves grease, road grimes and brake dust. Intense foaming action clings to wheels and lifts away the most stubborn soils. Blanketing agents helps formula spread into nooks and crannies to attack tough dirt. Safe for wheels and tires when used as directed (Do not use on wheels that are warm to the touch or on damaged wheels. Before use, test on an inconspicuous area. If hazing or spots appear, discontinue use. Do not apply to brake parts or other zinc and cadmium-plated surfaces. Safe on clear-coated and factory-painted wheels. Do not use on uncoated aluminum.) 100% satisfaction guaranteed or your money back. As the leader in quality care, Armor All absolutely guarantees its products will meet or exceed your highest standards. If you are unsatisfied for any reason, contact us for a full refund. Questions or comments? Please visit www.armorall.com or call 1-800-222-7784. Made in the USA.
Contains: Keep out of reach of children. Severe eye irritant. Skin irritant. May be harmful if swallowed. Avoid contact with eyes and skin. Wear eye protection and rubber gloves. Avoid breathing vapor or mist. First Aid: Eyes - Immediately rinse with water for 15 minutes. Call a doctor immediately. Skin - Rinse thoroughly with water. If irritation persists, call a doctor, if swallowed - Drink a glassful of water. Call a doctor or poison control center immediately. Keep out of reach of children. Contains: Sodium metasilicate, nonionic surfactant and tetrapotassium EDTA. Contains no phosphorus. Disposal: Offer empty container for recycling. If recycling is not available, discard empty container in trash.
Clean one wheel and tire at a time. 1. Wear eye protection and rubber gloves. 2. Wet cool wheel (Do not use on wheels that are warm to the touch or on damaged wheels. Before use, test on an inconspicuous area. If hazing or spots appear, discontinue use. Do not apply to brake parts or other zinc and cadmium-plated surfaces. Safe on clear-coated and factory-painted wheels. Do not use on uncoated aluminum) with hose. 3. Hold bottle 6 inches from wheel and tire, then completely saturate wheel and tire with cleaner. 4. Allow foam to penetrate for 30 seconds. 5. Wipe with a soft cloth sponge. 6. Thoroughly rinse wheel and tire. 7. Dry with soft, clean towel to prevent water spots. Repeat if necessary. Note: Do not allow wash water to enter storm drains, streams or lakes. Tips & Trick: Try waxing your wheels. It will minimize brake dust accumulation and make cleaning easier next time! For more Tips & Tricks, visit the Armor All Owner Center: www.aa-ownercenter.com.
About the Producer